Internet of things Using MQTT Protocol

Authors: Bhimraj Verma, Ashish Ranjan

Published in: IJRRETAS, Volume 4, Issue 11, pp. 1-5 (01 Nov 2018)

Impact Factor: 3.8 (2018)

License: CC BY 4.0 CC BY 4.0 (Open Access)

Certificate: View Certificate

Abstract

automatic meter reading and improve the existing system to an Internet of things using MQTT Protocol. The system will be read power consumption through help of current sensor, process it and calculates power consumption and send it to server. It is a combination of a current sensor and a GSM (Global System for Mobile Communications) module. The module chosen is having capability of doing high speed data processing and complete stack of GSM communication. By the virtue of blooming automation industry and wireless connectivity, all the devices within the home can be connected. This improves the comfort, energy efficiency, indoor security, cost savings of the home. Small and constrained embedded devices are used to remotely monitor the conditions within home and control the home appliances. In such case, power consumption and network bandwidth become a major concern. We need a low power device that transmits messages through a less verbose protocol. Owing to the ubiquitous availability of Wi-Fi, all the appliances within home can be connected through a common gateway. This paper presents an overview of a light weight Message Queuing Telemetry Transport (MQTT) protocol. The product improvement incorporates choice of fitting stage which gives appropriate learning and advancement stage for programming advancement. Gives essential programming framework to begin and concentrate on application advancement. The picked stage is Sierra Wireless Open AT application stage which depends on Open AT RTOS. It gives bland drivers to begin with and appropriate troubleshooting support. The stage itself is industry standard and gives a decent chance to figure out how to build up an Industry standard item. The system developed is a fundamental electricity power consumption data logger unit with the help of above technologies.

Keywords
  • Electricity meter data logger
  • ADC
  • RTOS
  • GSM
  • UART
  • MQTT
  • GPRS
References
  1. A K Shawhney , “Electrical and Electronics Measurements and Instrumentation” by Dhanpat Roy & Sons,4th Edition 2007.
  2. Vivek Kumar Sehgal,Nitesh Panda, Nipun Rai Handa, “Electronic Energy Meter with instant billing”,,UKSim Fourth European Modelling Symposium on Computer Modelling and Simulation.
  3. Devidas, A.R., Ramesh, M.V. ,”Wireless Smart Grid Design for Monitoring and Optimizing Electric Transmission in India, 2010 Fourth International Conference on Sensor Technologies and Applications (SENSORCOMM)”, pp.637-640, 2010.
  4. Kwang-il Hwang , “Fault-tolerant ZigBee-based Automatic Meter Reading Infrastructure”, Journal of Information Processing Systems, 5(4), 2009, pp. 221-228.
  5. Md. Mejbaul Haque, Md. Kamal Hossain, Md. Mortuza Ali, Md. Rafiqul Islam Sheikh, “Microcontroller Based Single Phase Digital Prepaid Energy Meter for Improved Metering and Billing System”, International Journal of Power Electronics and Drive System (IJPEDS),1(2), 2011.
  6. O.Homa Kesav, B. Abdul Rahim, “Automated Wireless Meter Reading System for Monitoring and Controlling Power Consumption”, International Journal of 3878 ,1(2),2012.
  7. B.O.Omijeh, G.I.Ighalo,”Design of A Robust Prepaid Energy Metering And Billing System”,JORIND,10(3),2012.
  8. Syed Khizar Ali Zaidi I, HuraMasroor I, Syed Rehan Ashraf I and Ahmed Hassan, “Design and Implementation of Low Cost Electronic Prepaid Energy Meter”, NED University of Engineering and Technology, Karachi, Pakistan, 2010.
  9. HuraMasroor I, Syed Rehan Ashraf I and Ahmed Hassan, “ Design and Implementation of low cost Electronic Prepaid Energy Meter”, NED University of Engineering and technology, Karachi, Pakistan, 2010.
  10. Ling Zou, Sihong Chu and Biao Guo., “The Design of Prepayment Polyphase Smart Electricity Meter System, International Conference on Intelligent Computing and Integrated Systems (ICISS)”, 22(24), 2010 pp. 430- 432,.
  11. Richa Shrivastava and Nipun Kumar Mishra, “An Embedded System for Wireless Prepaid Billing of Digital Energy Meter”, International Journal of Advances in Electronics Engineering, 2011,pp. 322-324. ISSN Online: (2455-4723) Volume IV Issue XI November 2018
  12. M.C. Ndinechi, O.A. Ogungbenro and K.C. Okafor, “Digital Metering System: A Better Alternative for Electromechanical Energy Meter in Nigeria”, International Journal of Academic Research, 3(5), pp. 189-192, 2011.
  13. Jain and Bagree , “ A prepaid meter using mobile communication” , International Journal of Engineering, Science and 164 Technology,3( 3), 2011, pp. 160-166.
  14. . Abhinandan Jain, Dilip Kumar, Jyoti Kedia , “Design and Development of GSM based Energy Meter International Journal of Computer Applications”, (0975 –
  15. . Vanishree k Rao, Sri G N Madhu “ GSM based Energy Meter Reading and Billing” International Journal of Science and Research (IJSR)-
  16. , 47(12),2012.
How to Cite
APA: Verma, B., & Ranjan, A. (2018). Internet of things Using MQTT Protocol. International Journal for Rapid Research in Engineering Technology & Applied Science, 4(11), 1–5. https://ijrretas.com/research-paper/internet-of-things-using-mqtt-protocol-
More from this Issue